EVA config script is not starteing after reboot

[doggy101]

Hi all just tried to install efa on a new VPS Rocky 9.4



I used this:

One-Step Install

eFa5 can be installed with just a single command, make sure you are logged in as root and you have a clean minimal installation to start with. Then just run the following command:

curl -sSL https://install.efa-project.org | bash

when the command has completed it asks for a reboot and then the config script does not pop up?

where can I find the config script? eFa first-time configure

[shawniverson]

Did you get an error during the install? It sounds like it did not install correctly.

[doggy101]

no no error it is just completing the above script and asks for a reboot and the the configure screen does not presents itself, when i rerun the script it's saying that all packages are allready downloaded

[shawniverson]

Can you attach the file /var/log/eFa/build.log ?

[doggy101]

[https://drive.google.com/file/d/1Ta07S ... sharingrl]

as you can see I tried it more than once

[shawniverson]

Can you confirm that eFa is installed?

Code: Select all

rpm -qa | grep eFa

[doggy101]

root@localhost ~]# rpm -qa | grep eFa
[root@localhost ~]#

no response just blank line

[ZimboKraut]

Hi there,

I have the same issue, but what I did notice, that on install there was a GPG "issue"

-----snip----
...
(285/285): re2c-2.2-1.el9.x86_64.rpm 4.7 MB/s | 497 kB 00:00
--------------------------------------------------------------------------------
Total 7.3 MB/s | 103 MB 00:14
Extra Packages for Enterprise Linux 9 - x86_64 1.6 MB/s | 1.6 kB 00:00
Importing GPG key 0x3228467C:
Userid : "Fedora (epel9) <epel@fedoraproject.org>"
Fingerprint: FF8A D134 4597 106E CE81 3B91 8A38 72BF 3228 467C
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-9
Key imported successfully
Public key for MailScanner-5.5.1-5.eFa.el9.noarch.rpm is not installed
Public key for MailWatch-1.2.23-2.eFa.el9.noarch.rpm is not installed
Public key for clamav-unofficial-sigs-7.2.5.1-1.eFa.el9.noarch.rpm is not instal led
....

-----snip----

In other words either not all orthe wrong GPG Key seems to have been installed in the script....

Any thoughts?

[shawniverson]

no response just blank line

What happens when you try to install it?

Code: Select all

sudo dnf install eFa

[doggy101]

Total 15 MB/s | 91 MB 00:06
Public key for MailScanner-5.5.1-5.eFa.el9.noarch.rpm is not installed
Public key for MailWatch-1.2.23-2.eFa.el9.noarch.rpm is not installed
Public key for clamav-unofficial-sigs-7.2.5.1-1.eFa.el9.noarch.rpm is not installed
Public key for dcc-2.3.168-1.eFa.el9.x86_64.rpm is not installed
Public key for eFa-5.0.0-8.eFa.el9.noarch.rpm is not installed
Public key for eFa-base-5.0.0-1.eFa.el9.noarch.rpm is not installed
Public key for perl-Encoding-FixLatin-1.04-1.eFa.el9.noarch.rpm is not installed
Public key for perl-Geo-IP-1.51-1.eFa.el9.noarch.rpm is not installed
Public key for perl-IP-Country-2.28-1.eFa.el9.noarch.rpm is not installed
Public key for perl-IP-Country-DB_File-3.03-1.eFa.el9.noarch.rpm is not installed
Public key for perl-Mail-DMARC-1.20230215-1.eFa.el9.noarch.rpm is not installed
Public key for perl-Net-DNS-Resolver-Programmable-0.009-1.eFa.el9.noarch.rpm is not installed
Public key for perl-Net-IDN-Encode-2.500-1.eFa.el9.noarch.rpm is not installed
Public key for perl-Net-LibIDN-0.12-1.eFa.el9.x86_64.rpm is not installed
Public key for perl-Sendmail-PMilter-1.24-1.eFa.el9.noarch.rpm is not installed
Public key for perl-Sys-Hostname-Long-1.5-1.eFa.el9.noarch.rpm is not installed
Public key for perl-Test-File-ShareDir-1.001002-1.eFa.el9.noarch.rpm is not installed
Public key for postfix-3.5.23-1.eFa.el9.x86_64.rpm is not installed
Public key for spamassassin-4.0.1-2.eFa.el9.x86_64.rpm is not installed
Public key for sqlgrey-1.8.0-8.eFa.el9.noarch.rpm is not installed
Public key for sqlgreywebinterface-1.1.9-5.eFa.el9.noarch.rpm is not installed
Public key for tnef-1.4.18-1.eFa.el9.x86_64.rpm is not installed
Public key for unrar-6.2.5-1.eFa.el9.x86_64.rpm is not installed
The downloaded packages were saved in cache until the next successful transaction.
You can remove cached packages by executing 'dnf clean packages'.
Error: GPG check FAILED

[doggy101]

same as the user above error on the pub key

[shawniverson]

In other words either not all orthe wrong GPG Key seems to have been installed in the script....

Any thoughts?

Try running this:

Code: Select all

curl -sSL https://dl.efa-project.org/rpm/eFa5/centos9/RPM-GPG-KEY-eFa-Project-256 > RPM-GPG-KEY-eFa-Project-256
sudo rpm --import RPM-GPG-KEY-eFa-Project-256
sudo dnf install eFa

[doggy101]

no more errors


spamassassin-4.0.1-2.eFa.el9.x86_64 sqlgrey-1:1.8.0-8.eFa.el9.noarch
sqlgreywebinterface-1:1.1.9-5.eFa.el9.noarch sscg-3.0.0-7.el9.x86_64
tmpwatch-2.11-20.el9.x86_64 tnef-1:1.4.18-1.eFa.el9.x86_64
unbound-1.16.2-3.el9_3.5.x86_64 unbound-libs-1.16.2-3.el9_3.5.x86_64
unrar-6.2.5-1.eFa.el9.x86_64 xml-common-0.6.3-58.el9.noarch

Complete!
[root@localhost ~]#

[shawniverson]

Reboot and you should be good.

[doggy101]

ran the script looks oke for now

will keep on configuring..

thanks for the help