v4 Beta Login & User problems

Testing of eFa 4
Post Reply
fastbone
Posts: 2
Joined: 05 Jan 2019 08:20

v4 Beta Login & User problems

Post by fastbone » 05 Jan 2019 08:21

When you setup the v4 beta with kstesting, after the first boot/login script asks for username and password for web/console access. Both inputs seem to be ignored, as login is not possible.

User avatar
shawniverson
Posts: 2659
Joined: 13 Jan 2014 23:30
Location: Rushville, Indiana, USA
Contact:

Re: v4 Beta Login & User problems

Post by shawniverson » 05 Jan 2019 18:21

Does your initial console login screen display this?

Code: Select all

First time login: root/eFaPr0j3ct
If not, your build attempt has failed for some reason. If you can gain access, browse to /var/log/eFa/build.log and attach it.
Version eFa 4.0.0 RC1 now available in testing repo. Come join us in advancing eFa!

User avatar
shawniverson
Posts: 2659
Joined: 13 Jan 2014 23:30
Location: Rushville, Indiana, USA
Contact:

Re: v4 Beta Login & User problems

Post by shawniverson » 06 Jan 2019 14:19

Version eFa 4.0.0 RC1 now available in testing repo. Come join us in advancing eFa!

Alleyviper
Posts: 38
Joined: 16 Oct 2018 05:55
Location: Portugal

Re: v4 Beta Login & User problems

Post by Alleyviper » 14 Jan 2019 00:22

I have just installed EFA 4 from devbuild.sh on a clean Centos 7.

Problems found:
- On web setup, admin user for console password not accepting especial symbols like "!". It just loops asking the user admin for web console and password, until I just type a normal Up&Lower case password.

- After installing, on the web console, everything is turned off on postfix, mailscanner and msmilter.

- Logged via cli, can' t go to root user, EfaPr0j3ct or eFaPr0ject as refered do not work.

Alleyviper
Posts: 38
Joined: 16 Oct 2018 05:55
Location: Portugal

Re: v4 Beta Login & User problems

Post by Alleyviper » 14 Jan 2019 06:31

I cannot do a kickstart on my provider. As for version 3.0.2.6 it was installed with the no ks script.

I understand now than on setup, one user is admin {running sudo as root} and the other user is for web Access to EFA 4.

Reinstalled clean Centos 7 and used the devbuild.sh. Still services are down. From cli as sudo This happens:

############
Complete!
[ ~]$ service postfix start Redirecting to /bin/systemctl start postfix.service
==== AUTHENTICATING FOR org.freedesktop.systemd1.manage-units ===
Authentication is required to manage system services or units.
Authenticating as: {user}
Password:
==== AUTHENTICATION COMPLETE ===
[~]$ service msmilter start Redirecting to /bin/systemctl start msmilter.service
==== AUTHENTICATING FOR org.freedesktop.systemd1.manage-units ===
Authentication is required to manage system services or units.
Authenticating as: {user}
Password:
==== AUTHENTICATION COMPLETE ===
Job for msmilter.service failed because a configured resource limit was exceeded. See "systemctl status msmilter.service" and "journalctl -xe" for details.
[~]$ sudo /etc/init.d/Mailscanner start sudo: /etc/init.d/Mailscanner: command not found
[~]$
###############

Jan 14 06:23:03 my.domain.tld MSMilter[16570]: Could not use Custom Function code MailScanner::CustomConfig::InitSQLWhitelist, it ...Jan 14 06:23:03 my.domain.tld MSMilter[16570]: )
Jan 14 06:23:03 my.domain.tld msmilter-init[16567]: setconn: inet:33333@127.0.0.1: Permission denied at /usr/sbin/MSMilter line 619.
Jan 14 06:23:03 my.domain.tld msmilter-init[16567]: main: socket not bound at /usr/sbin/MSMilter line 625.
Jan 14 06:23:03 my.domain.tld msmilter-init[16567]: BEGIN failed--compilation aborted at /usr/sbin/MSMilter line 634.
Jan 14 06:23:04 my.domain.tld msmilter-init[16567]: MSMilter started with process id 16571
Jan 14 06:23:04 my.domain.tld systemd[1]: PID 16571 read from file /var/run/MSMilter.pid does not exist or is a zombie.
Jan 14 06:23:04 my.domain.tld systemd[1]: Failed to start LSB: MSMilter daemon.
Jan 14 06:23:04 my.domain.tld systemd[1]: Unit msmilter.service entered failed state.
Jan 14 06:23:04 my.domain.tld systemd[1]: msmilter.service failed.
Hint: Some lines were ellipsized, use -l to show in full.
[server@user ~]$

Alleyviper
Posts: 38
Joined: 16 Oct 2018 05:55
Location: Portugal

Re: v4 Beta Login & User problems

Post by Alleyviper » 14 Jan 2019 06:41

Got it

Post Init.................FAILING

User avatar
shawniverson
Posts: 2659
Joined: 13 Jan 2014 23:30
Location: Rushville, Indiana, USA
Contact:

Re: v4 Beta Login & User problems

Post by shawniverson » 14 Jan 2019 22:33

Alleyviper wrote:
14 Jan 2019 00:22
Problems found:
- On web setup, admin user for console password not accepting especial symbols like "!". It just loops asking the user admin for web console and password, until I just type a normal Up&Lower case password.

- After installing, on the web console, everything is turned off on postfix, mailscanner and msmilter.

- Logged via cli, can' t go to root user, EfaPr0j3ct or eFaPr0ject as refered do not work.
1) I am able to set an "!" and other special characters in the password fields without any trouble. Are you using the current master branch?

2) Did you reboot and proceed with setup? You performed a development build, so you need to reboot manually and proceed from there.

3) The development build does not reset the root password.
Version eFa 4.0.0 RC1 now available in testing repo. Come join us in advancing eFa!

Alleyviper
Posts: 38
Joined: 16 Oct 2018 05:55
Location: Portugal

Re: v4 Beta Login & User problems

Post by Alleyviper » 16 Jan 2019 02:04

Could Install and EFA GUI worked.

Post Reply