How to enable IPV6

General eFa discussion
Post Reply
Woger
Posts: 67
Joined: 15 Mar 2017 10:54

How to enable IPV6

Post by Woger »

Hi,
After updating EFA, it seems to have diabled the ipv6.

When I try to enable it from console I get a "eth0 is nog an active interface" error. But it's the only interface, and an ifconfig show a ipv4 and ipv6 address.
Can I enable it by manually? Changing ifcg-eth0 to IPV6INIT="yes" didn't help.

Thanks,
Roger
Woger
Posts: 67
Joined: 15 Mar 2017 10:54

Re: How to enable IPV6

Post by Woger »

Found out that the ip addresses were configured on eth1 and that interface was disabled. Enabling the eth1 solved the problem.
Post Reply